00 Qan[T]

Notes

• 24-page manual (12 PDF spreads; cover Bandai 2010, code 0165654, reissue box code 5061587), no missing pages: page 3 symbols, page 4 runner list, page 5 the separately sold green LED set, assembly on pages 6–11 and 14–22 (steps 1–20), pages 12–13 photos and colour guide, page 23 marking sticker/decal placement. Steps 12, 13, 14-6, 14-8 and most of steps 18–20 only join sub-assemblies or transform, with no new parts.
• Runners B, D, G and H come twice; all others once. Polycaps are PC-130B. I1 and I2 are clear plastic (sword blades, GN lenses): cut cleanly; I2 matches the first 13 numbers of I1 and is used for the left arm/leg and the second of each GN Sword Bit.
• Checked against the runner page: every number is used and matches the pieces on the runners; the 362 total equals the pieces on the runners minus the crossed-out ones. Runner A prints one label for two pieces at numbers 1, 2, 34 and 35. The BA4-A base leaves 1, 8, 11, 14 and 15 unused (crossed out). The transcription was done twice independently and both passes matched.
• Manual marks: ◀▶ (反対側に取り付けるパーツ) = part for the opposite side, cut both (A-8 / A-9, C-8 / C-9, C-13 / C-14, E-32 / E-33, I2-11 / I1-11); ▶|◀ (両側に同じパーツ) = same part on both sides, already doubled (H-9, A-34, A-35); ×2 = make two (already multiplied in); ! = mind the orientation; nipper icon (切り取る部分) = cut off the marked portion of the part (G-23, the small pins on blades I1-14 / I1-15).
• Optional parts are counted because they are on the runners: A-19 (seated pilot in the cockpit), A-20 (standing figure, display as you like), F-11 (joint for the separately sold Action Base 1, step 14-9), E-12 (joint mounting the GN Sword V in sword mode on the forearm, step 18-2). The BA4-A display stand is in the box, with 1 short screw, 2 long screws and 3 nuts (not counted).
• The green LED set (LED unit + part J1-1 + screw) is sold separately and not in the box, so it is not listed; lighting both ends of the GN Drive needs two sets. Colour stickers are lettered in katakana (ア…ツ) in the steps; marking stickers う and そ (hiragana) are only for the LED option; other marking stickers and decals follow page 23 of the manual.