Gundam Deathscythe EW

Notes

• 17-page manual plus back cover (painting guide), no missing pages: assembly on pages 7 and 10–16 (pages 12–14 and 15–17 are tri-fold spreads); pages 2–3 and 8–9 are articles, 4–5 the runner list, 6 general instructions, 17 sticker/decal placement.
• Runners F and XB come ×2, every other runner ×1. PC is PC-205A; PC-1 is marked ✕ (not used). Runner G2 only carries numbers 10–13 (continuing from G1).
• Manual symbols: ▶|◀ (両側に同じパーツを取り付ける) = the same part goes on both sides, counted ×2 (B-5 in step 6-6); ◀▶ (反対側に取り付けるパーツ) = the part for the opposite side, cut both; ◪ = choose one; ×2 box at a step = build 2. The right leg uses runner C1, the left leg C2 (numbers in brackets).
• Hands: each hand has 4 swappable finger blocks (right XA-7 / XA-1 / XA-5 / XA-10 scythe grip; left XA-8 / XA-2 / XA-6 / XA-9). All 4 are counted so you cut them all; the unused ones are for posing.
• The Beam Scythe is held in hand or mounted on the back with H-28 (H-28 is counted). XA-11 is the Action Base 1 adapter (base sold separately) and C1-16 a standing pilot figure: both counted because they are on the runners.
• Runner check: 252 pieces, exactly the number of pieces on the runners (minus PC-1 ✕).