Providence Gundam

Notes

• The manual has 24 pages (12 PDF spreads), printed pages 2–23 continuous, none missing. Runners on pages 4–5; assembly on pages 6–11 and 14–22 (steps 1–16); pages 12–13 are articles and the colour guide, page 23 the marking guide. Steps 5-2, 9-1, 13-2, 15 and 16-1 only join sub-assemblies or pose the kit, no new parts.
• Runners D, E and J come 2 per box, every other runner 1; the kit has no polycaps. H1 is soft TPE (the tubes in the torso, steps 1-5 → 1-7); H2 is clear and numbered on from H1 (4–9). Parts printed as "F1 (F2)" are identical pieces on two runners: the bracketed one is for the other side.
• Checked against the runner pages: every number without a ✕ is used exactly as many times as the runners hold. Runners I and J have many crossed-out (unused) numbers: I-3–6, 8, 11, 13–16, 21, 22, 29, 30, 35, 36, 39, 40, 42, 48, 49, 51, 52; J-1, 5, 6, 13–15, 18, 25, 26, 32, 33, 37, 38, 41, 44–48, 50. The second D runner crosses out D-8 and D-9 (only 1 of each used); the second E runner crosses out one piece each of E-2, 3, 4, 6; F2-2 and F2-9 each have one crossed-out piece.
• Numbers with several pieces on one runner: A-1, 3, 23, 24, 26, 27 (2); F1-1, F1-7, F1-12, F2-1, F2-7, F2-12 (3); F1-2, F1-9 (2); E-2 to E-6 (2 per runner); H2-8 (2), H2-9 (3). Step 9-2 (printed F1⑦ (F2⑦), 4 hip spikes) uses 3× F1-7 + 1× F2-7 because step 9-3 needs 2× F2-7; step 10-6 (3 large Dragoons) uses 2× F1-2 + 1× F2-2.
• Choose-one parts are both listed because both are on the runners: A-16 or the clear H2-7 (head, step 2-1); hand I-25 or I-27 (right arm), I-26 or I-28 (left arm). I-45 (step 14-3) is the adapter for Action Base 1 (sold separately), used instead of the kit base; it is on runner I, so it is counted. I-26 reused in step 13-3 (shield mount) is not counted again. B-7 (step 10-8): the manual only says to place it wherever you like; it is counted.
• Manual symbols: "!" = mind the orientation (! flag on the site); crossed-out nippers ⊘ (Do not cut) = that bit belongs to the part, don't trim it; nippers (Cut here) = gates to cut cleanly. Sticker sheet A: 1–3 on the head (step 2-1), 4 on the rifle (11-3), 5 on the shield (12-2); sticker sheet B and the dry decals follow page 23 of the manual. No doubtful parts.