Gundam GP01 Full Burnern

Notes

• 40 printed pages (22 PDF spreads), none missing. Assembly on pages 4–36; pages 1–2 show the Core Fighter transformation, pages 37–40 the GP01 → GP01Fb conversion (only frame 10 on page 39 adds new parts).
• The kit builds two forms: GP01 (steps 1–12) and Full Burnern GP01Fb. Sections marked (Fb), steps 18–23 and frame 10 on page 39, are parts for the Full Burnern form only. The box holds parts for both forms and the list counts all of them (1,203): GP01 with weapons and hangar (steps 1–17) is 898 pieces, the Fb parts 305. For GP01 only, skip the (Fb) sections.
• Two Core Fighters in the box: Core Fighter II (steps 5–6) and Core Fighter IIFb (steps 22–23). Steps 5-1 → 5-3 make 2 cockpit sets, one for each.
• 43 runner sheets (31 kinds). Runners with 2 sheets: B, C, D, I, J, O, P, U, W, WA, WB, ZA. V1 is numbered 1–21, V2 continues 22–39. Runner Z has no numbers (2 beam saber blades).
• Every number was checked against the runner list on page 3: all are used, exactly as many as the box holds. Many runner labels mark 2–4 identical pieces (e.g. P-3, P-16, A-31, M-7, V2-38, U-8: 4 per sheet; T-11: 8; WA-3: 19), so a part can be cut more times than there are sheets.
• The second W sheet lacks one W-30 piece (✕ in the manual): the box has 3 W-30, matching the 3 energy packs in step 13-1.
• Not counted: TP2×4 screws (8 + 2 spare) and TP2×6 screws (30 + 3 spare), springs (2 leg, 2 shoulder, 1 shield), mesh pipe (cut into 30 mm lengths), the DC part (ready-made hip joint), stickers. The LED and battery terminals A/B are in the box and listed as LED items; the CR1220 button battery is sold separately.
• Step 14 is the machine gun (the manual only says WEAPONS). Step 16 ×2: beam saber blades into the hilts made in step 6-11. Stickers (marking seal) are not listed per step.